18
Selecting Sounds
A set of two sounds is assigned to each memory button [1]–[4]:
one sound played by the head and another sound played by the
rim.
1.
Press one of the [1]–[4] buttons.
The name of the sound set assigned to the selected button
will be displayed for approximately two seconds.
Then, the metronome tempo will be displayed.
2.
Strike the pad.
Striking the head and rim will produce different sounds.
If you strike the head and rim simultaneously, only one
of the sounds will be heard. It is not possible to play
both sounds simultaneously.
Factory settings
If you want to change the sound set assigned to the
memory button, or to edit settings such as tuning and
volume, refer to “Changing the Settings of the Memory
Buttons” (p. 25).
Selecting Sounds
(Memory Buttons)
Button Sound Set Name Pad Instrument
1 MarchSD
Head 1: mSD 1
Rim 2: mSD 1r
2BD&Cym
Head 23: mBD 2
Rim 58: Cym 1
3Taiko
Head 50: Taiko1
Rim 51: Taiko1r
4SFX
Head 121: Scrtch3
Rim 127: PhilHit
Memory Number
RMP-12_e.book 18ページ ２００８年７月１１日 金曜日 午前９時４５分