Chapter5
1Synth Bass | 2 Synth Lead |
2 | 8 | 3 | 9 | 5 | 10 | 11 | 6 | 2 | 3 | 9 | 10 |
6 | 1 | 4 | 7 | 12 | 11 | 7 | 8 | 1 | 4 | 5 | 10 |
1Choose “PRESET
2Since bass involves low frequencies, turn the [PITCH] knob on the OSC section all the way to left, and set to
3Turn the [CUTOFF] knob on the FILTER section all the way left and set to (MIN). The sound becomes inaudible.
4Let’s create the initial attack of the sound. Raise the [D] slider of the FILTER ENV a little.
5Let’s determine the timbre of the sustained note. Raise the [S] slider of the FILTER ENV a little.
6In order to achieve the effect of sliding over the frets while holding the string down (glissando), press the [SOLO] button.
7Slightly raise the [DEPTH] slider of the FILTER ENV to determine the overall timbre. The attack is weakened, and sound will be darkened.
8Press the [SLOPE] button and select
9Turn the [RESONANCE] knob and add a little bite to the sound as you like.
10Press the [FX ON] button.
11Turn the [TIME] knob in the EFFECTS section all the way left to (MIN). Turn the [DEPTH] knob and fatten the bass timbre.
12Lastly, fine adjust the [DEPTH] slider of the FILTER ENV to determine the overall sound.
1Choose “PRESET
2Turn the [CUTOFF] knob in the FILTER section to the “two o’clock” position.
3Turn the [RESONANCE] knob in the FILTER section to the “one o’clock” position.
4Let’s create the initial portion of the sound. Raise the [A] and [D] sliders of the FILTER ENV a little.
5Determine the overall timbre by raising the [DEPTH] slider of the FILTER ENV.
6Press the [SLOPE] button in the FILTER section and select
7Press the [PORTAMENTO] button.
8To further enhance the lead synth sound, press the [SOLO] button.
Now it plays monophonic (a single note at a time). Also when you hold a key while pressing another key, the two notes will transition smoothly.
9Press the [FX ON] button.
10Position the [TIME] knob at “twelve o’clock”. Turn the [DEPTH] knob and add some echo effect to the lead sound (delay).
Chapter
5
19 | 20 |
