Roland TD-8, TD-12, TD-3, TMC-6, TD-20, TD-6/6V manual Settings for the Roland TD-10

SMARTRIGGER USERS GUIDE Version 1.4 1/30/2005

Included Ride Y Cable splits stereo cable into 2 mono inputs

Plug the black TIP plug into the RIDE input and the orange RING plug into the EDGE input. This places the bow ride sound on the Ride input and the bell ride sound on the Edge input. Make sure you have a ride bow sound assigned to the HEAD of the Ride input and a bell sound assigned to the HEAD of the Edge input.

Alternatively, you can use one of the AUX inputs for the ride without the Y cable. The AUX inputs are dual-piezo inputs like the toms and snare and allow for dual piezo stereo triggers like the Smartrigger CY-16R. This frees up inputs 10 and 11 (Ride and Edge) for two additional cymbals. Make sure to select PD-120 for the input type on the AUX input as this will allow the bell and bow sounds to be triggered, then select a ride bow instrument and assign it to the HEAD of the AUX input and a ride bell instrument and assign it to the RIM of the AUX input. Make sure you have a ride bow sound assigned to the HEAD and a bell sound assigned to the RIM of the AUX input.

Settings for the Roland TD-10

	Type	Sens	Thold	Curve	Scan	ReTrg	Mask	Xtalk
						Can.
Splash	PD7	3	2	Linear	0.3	3	12	30
Crash	PD7	3	2	Linear	0.3	3	12	30
China	PD7	3	2	Linear	0.3	3	12	30
Ride Bow	PD7	5	2	Linear	0.3	3	12	40
Ride Bell	PD7	2	1	Linear	0.3	3	12	30
Hi Hat	PD-7	3	2	Linear	0.3	3	12	30

Notes for using the Smartrigger CY-16RC3 Triple Zone Crash/Ride Cymbal:

Connect one stereo cable from the bow trigger jack to the RIDE input on your module.

Connect the other stereo cable from the bell trigger jack to the AUX 1 input on your module.

IMPORTANT!!! Make sure you have two inputs set to trigger the appropriate sounds for each kit

o Ride Input HEAD = Ride Bow Sound o Ride Input RIM = Ride Edge Sound