Roland TMC-6, TD-12, TD-3, TD-20, TD-6/6V manual Settings for the Roland TD-8

SMARTRIGGER USERS GUIDE Version 1.4 1/30/2005

oAux Input HEAD = Ride Bell Sound

oAux Input RIM = Ride Edge Sound (Same as #10 RIM)

Notes for using the Smartrigger CY-16R Dual Zone Ride Cymbal:

Use the included Y cable on the module end of the ride’s stereo cable. Plug the black TIP plug into the RIDE input and the orange RING plug into the AUX 1 input.

Settings for the Roland TD-8

	Type	Sens	Thold	Curve	Scan	ReTrg	Mask	Xtalk
						Can.
Splash	CY1	10	4	Linear	2.5	8	8	40
Crash	CY1	10	5	Linear	2.5	8	8	40
China	CY1	10	4	Linear	2.5	8	8	40
Ride Bow	CY1	10	4	Linear	2.5	8	8	60
Ride Bell	CY1	12	2	Linear	2.5	8	8	50
Hi Hat	CY1	10	2	Linear	2.5	8	8	40

Notes for using the Smartrigger CY-16RC3 Triple Zone Crash/Ride Cymbal:

Connect one stereo cable from the bow trigger jack to the RIDE input on your module.

Connect the other stereo cable from the bell trigger jack to the another input on your module.

IMPORTANT!!! Make sure you have the two inputs set to trigger the appropriate sounds for each kit

o Ride Input HEAD = Ride Bow Sound o Ride Input RIM = Ride Edge Sound o Other Input HEAD = Ride Bell Sound

o Other Input RIM = Ride Edge Sound (Same as Ride RIM input)

Notes for using the Smartrigger CY-16R Dual Zone Ride Cymbal:

Do not use the included Y cable. Plug the included stereo cable into the AUX 11/12 input. A Ride sound should be assigned to input #11 and a Bell sound should be assigned to input #12.

Alternatively, you can use one input for the Ride and use an Xride instrument. This setting will allow louder hits to trigger the bell sound and softer hits to trigger the bell sound.

You can also use a Y cable (such as the Hosa YPP-117) to access input #2, splitting the Kick to 1 and assign the bell instrument to input #2.