Multi Format conversion with Multiple Connectors in one unit
■Processing
| Scaling: Scaling between the specified input and output | |
Video Processing | Frame Sync: Built in frame synchronizer and genlock to external device | |
Frame Rate Conversion: from 59.94 to 50 Hz etc. | ||
| ||
| I/P Conversion: | |
Audio Processing | Delay: Adjustment with Millisecond or Frame | |
Sample Rate Conversion: from 32 to 48 kHz etc. | ||
| ||
■Video Connectors |
|
IEEE1394 Connector | Conforms to IEEE1394, HDV standards, Same con- | ||
(i.LINK) | nector on front and rear | ||
| |||
COMPONENT Input | BNC Type | HD/SD: Y/Pb/Pr (75 ohms), | |
Connector | |||
|
| ||
|
| RGB (8 bit each) | |
DVI | Digital RGB dot clock: | ||
link | Analog RGB: R/G/B 0.7 | ||
| |||
|
| RGB dot clock: | |
| BNC Type | Supports embedded audio | |
Conforms to SMPTE259M, SMPTE272M, | |||
|
| SMPTE292M, SMPTE299M | |
COMPONENT Output Connector | BNC Type | HD/SD: Y/Pb/Pr (75 ohms), | |
| DVI | RGB (8 bit each) | |
Digital RGB: same timing as analog component | |||
link | |||
| Analog Component: Y/Pb/Pr (75 ohms) | ||
|
| ||
|
| Supports embedded audio | |
BNC Type | Conforms to SMPTE259M, SMPTE272M, | ||
|
| SMPTE292M, SMPTE299M | |
REF Input | BNC Type | Black Burst, | |
REF Output | BNC Type | Loop Thru Output | |
■Audio Connectors |
|
| |
|
|
| |
Input CH1, CH2 | XLR type | 20 k ohms | |
Input CH3, CH4 | RCA phono type | 20 k ohms | |
Output CH1, CH2 | XLR type | 600 ohms | |
Output CH3, CH4 | RCA phono type | 1 k ohms | |
■Others |
|
| |
|
| ||
Display | Character Type LCD: 20 characters, 2 lines (backlit LCD) | ||
Power Supply | AC 117 V, AC 230 V, AC 240 V (50/60 Hz), AC 220 V (60 Hz) | ||
Power Consumption | 60 W |
| |
Dimensions | 482 (430 without rack mount bracket) (W) x 309 (D) x 44 (H) mm * EIA- | ||
1U Rack Mount Size | |||
| 19 | ||
Weight | 4.5 kg, 9 lbs 15 oz | ||
Accessories | Owner's Manual, | Rubber Foot x 4, Power Cord | |
|
|
|
19