7.Clean the front panel with a soft cloth, warm water, and a mild detergent. Rinse and dry thoroughly.
6.Replace air filter in front panel and replace the elastic band.
9.Wipe the control panel clean with a soft, dry cloth.
10.Replace the front panel. Set bottom of front panel on bottom spring clips. Then press down on top edge of front panel and push it onto unit until the tabs snap into place.
11.Reconnect power cord to outlet.
Performing annual maintenance
Your ‘air conditioner needs annual mainte- nance to ensure steady, top performance throughout the year. Call the service com- pany recommended by your dealer to:
l Inspect and clean the coils and conden- sate water passages.
l Check fan.
The compressor and fan motor are sealed and need no oiling. The expense of an annual inspection is the consumer’s responsibility.
OR
If you are familiar with electrical appliances, you can do the inspection and maintenance yourself. If you choose to do so, follow these steps:
NOTE: Do not lift, push, or pull any white beaded foam (expanded polystyrene) parts.
1.Disconnect power cord from outlet.
2.Remove the front panel. (See “Cleaning the front panel and air filter” on page 7.)
3.Remove unit from the window.
Electrical Shock Hazard
Unplug power cord from outlet before servicing.
Be sure no liquid gets into the motor, electrical control box, or compressor terminals.
Failure to follow these instructions can result in death, electrical shock, or serious injury.
Excessive Weight Hazard
Use 2 or more people to move and install air conditioner.
Failure to do so can result in back or other injury.
a
WITH QUESTIONS OR COMMENTS
