Roper FGS395B tips, Special, To stop the Self-Cleaningcycle at any time

4.Move the Lock Lever to the right-the Clean position. The Clean Indicator Light will come on.

5.After the Self-Cleaning cycle is started, the Lock Indicator Light comes on when the oven temperature goes above normal baking/roasting temperatures. The door cannot be opened and the Lock Lever must not be moved when the Lock Indicator Light is on.

4.After the Self-Cleaning cycle is com- pleted and the oven reaches normal

baking/roasting temperatures, the Lock Indicator Light will go off. Move the Lock Lever back to the left. DO NOT FORCE IT. Wait until it moves easily. Turn the Oven Selector and Oven Temperature Control clockwise to OFF. The Clean Indicator Light will go off.

7.After the oven is cool, wipe off any residue or ash with a damp cloth. If needed, touch up spots with a soapy steel-wool pad.

To stop the Self-Cleaning cycle at any time:

1.Push in and turn the Stop Time Knob clockwise until it points to the correct time of day.

3.Turn the Oven Selector and Oven Temperature Control to OFF. When the Lock Indicator Light goes off, move the Lock Lever back to the left. DO NOT FORCE IT. Wait until it moves easily.

Special

tips

l Keep the kitchen well

ventilated

during the

l If the

Self-Cleaning

cycle

does

not

get

Self-Cleaning

cycle to

help get rid of heat,

the oven

as clean

as you

expected,

the

odors

and

smoke.

cycle may not have been set long enough

l After

the

oven

is cool, wipe up

any

or you

may not have prepared

the

oven

residue

or ash

with a damp cloth or

properly.

Set the Self-Cleaning

cycle

sponge.

If any

spots remain, clean with a

longer

the next time and hand-clean

areas

mild

abrasive cleanser

or cleaning sponge.

noted

on page 20.

l Clean the oven before it gets heavily soiled. Cleaning a very soiled oven takes longer and results in more smoke than usual.

22