Using the automatic ice maker
The ON/OFF lever is a wire signal arm.
lON (down) . . . to start ice production l OFF (up) . . . to stop ice production
NOTE: Donot | ice &r | ON until. . . |
.
hed to the back of the refrlw cabinet.
Raise signal arm to stop ke maker.
Lower signal arm to start ice maker.
Solving common ice maker problems
PROBLEM
Ice crescents attached at corners
Ice maker won’t make ice
CAUSE
lIt is normal
l ON/OFF lever in the OFF (up) position
l Freezer not cold enough
l Ice attracts airborne
odors; okl ice
l Poor water quality
l Foods not properly wrapped
lIce bin and freezer need cleaning
l Plumbing to ice maker
l New ice maker
SOLUTION
l They break apart easily.
l Move ON/OFF lever to the ON (down) position.
l Ice maker will not operate until freezer is coM enough to make ice. This couM take overnight.
l Dump old ice and make a new supply. Store excess ice in a covered container.
l Water containing minerals (such as suffur) may require a filter. Try to avoid softened water supplies.
l Wrap food properly. See pages 20 and 21.
l Clean freezer and ice bin. See cleaning chart on page 17.
l Follow Installation Instructions for proper ice maker water supply hookup. (See back of refrigerator cabinet.) Try to avoid softened water supply.
l Rrst few batches of ice from a new ice maker may have an
11
