Changing the light bulbs, Electrical Shock Hazard | Roper RS22AW

Changing the light bulbs

Electrical Shock Hazard

Before removing a light bulb, either unplug the refrigerator or disconnect the electricity leading to it at the main power supply.

Failure to do so could result in personal injury.

To change refrigerator light:

1.Disconnect refrigerator from power supply.

2.Reach behind the Control Console to remove bulb.

3.Replace bulb with a 40-watt appliance bulb.

4.Reconnect refrigerator to power supply.

To change crisper light:

1.Disconnect refrigerator from power SUPPb-

2.Pull top of light shield forward until it snaps free.

3.Lower light shield to clear bottom supports.

4.Pull light shield straight out to remove.

5.Replace bulb with a 40-watt appliance bulb.

6.Replace light shield in reverse order.

7.Reconnect refrigerator to power supply.

To change lower freezer light:

1.Disconnect refrigerator from power

2.Grasp front of light shield.

3.Pull bottom of light shield forward until it snaps free.

4.Replace with a 40-watt appliance bulb.

5.Press light shield straight on until it snaps into place.

6.Reconnect refrigerator to power supply.

NOTE: Not all commercial appliance bulbs will fit your refrigerator. Be sure to replace bulb with one of the same size and shape.

Crisper light

Lower freezer

-light

15

Image 15

Roper RS22AW Changing the light bulbs, Electrical Shock Hazard, To change refrigerator light, To change crisper light

Contents

NO-FROST REFRIGERATOR-FREEZER Model RS22AW Thank you for buying a Roper appliance Your safety is important to us Help us help you Important Safety Instructions Parts And Features Before Using Your Refrigerator Cleaning itPlugging it Leveling it Lnstalling it properly Using Your Refrigerator Setting the controlsThis Section Shelves SettingsAdjusting the refrigerator Changing the control Adjusting the meat drawer temperature Removing the crisper and crisper coverRemoving the meat drawer and cover To remove the bin Removing the freezer shelvesRemoving the freezer bin To remove the shelves Solution Using the automatic ice makerSolving common ice maker problems Problem To remove ice bin Removing the ice maker storage bin Using the cold water and ice dispensers Ice dispenserWater dispenser Ice maker/dispenser problems Removing Base grilleSolving common To change crisper light Changing the light bulbsElectrical Shock Hazard To change refrigerator light Saving energy Understanding the sounds you may hear Part Cleaning your refrigeratorHOW to Clean Caring For Your Refrigerator Floor under Door liners and gasketsPlastic Parts Defrost Pan Power interruptions Vacation and movingCare Storing fresh food Food Storage Guide Packaging recommended for use Storing frozen foodPackaging Freezing There is water in the defrost Pan Lights do not work If You Need Assistance Or ServiceBefore calling for assistance Possible Cause Motor seems to run too much If you need serviceIf you are not satisfied with How the problem was solved If you need assistance Roper Refrigerator Warranty