Planar PS4652/PS5552/PS6552 manual Setting up the display, Mounting the display

Setting up the display 7

Setting up the display

Mounting the display

You can install the display on a vertical surface with a suitable wall mounting bracket or on a horizontal surface with a table stand. Please pay attention to the following notes during installation:

•This display should be installed by at least two adult persons. Attempting to install this display by only one person may result in danger and injuries.

•Refer the installation to qualified technicians. Improper installation may cause the display to fall or malfunction.

Installing the display on a wall

1.Place a clean, dry and lint-free cloth on a flat, horizontal and object-free surface. Make sure that the size of the cloth is larger than the display.

2.Gently lay the display on the cloth with the LCD screen facing down.

3.Identify the wall mounting screw holes on the back of the display as shown in the illustration.

Note:

•Screw type:

-PS4652/PS5552: M6

-PS6552: M8

400mm

400mm

4.Install the wall mounting bracket on the display and attach the display to the wall

according to the mounting bracket’s		Thickness of the
instructions. The length of the screw should
	Display	wall mounting
exceed the thickness of the wall mounting
		bracket
bracket by at least 10 mm. Make sure that all
screws are tightened and secured properly.
(Recommended torque: 470 - 635N•cm). The
mounting means should be strong enough to		10 mm
bear the weight of the display.
		(0.39")

Note:

• To maintain proper ventilation, keep at least 10 mm of clear space from the back cover

of the display to the wall.10mm

(0.39")

• Please consult a professional technician for wall mount installations. The manufacturer accepts no liability for installations not performed by a professional technician.