5.Remove both handle assemblies as shown. Keep all parts together.
Remove hole plugs from opposite side of doors. Reinstall handles on new side. Seal all original holes with hole plugs from new side.
MODEL RT18DK w
Freezer handle
Refrigerator ?’I handle -
II
M
MODEL RT18EK
6.Using a putty knife, remove the black plug from the front of the cabinet base (new hinge side) and reinstall it in the old set of lower hinge holes.
7.Reinstall the bottom hinge assembly in the new side. Do not tighten the screws. The hinge must remain loose against the cabinet for easier alignment.
6.Lii the refrigerator door up onto the bottom hinge assembly. Hold door in place while reinstalling center hinge assembly.
9.Level refrigerator door while holding door against front of cabinet. After leveling, tighten bottom and center hinge screws.
10.Remove screws (or plugs) from the hinge holes in the top of the cabinet and reinstall them in the opposite side.
11.Remove plug from upper bearing of freezer door and reinstall on opposite
side. r-- /--------I
D
12.Lii freezer door up onto the center hinge assembly. Reinstall top hinge assembly while holding door in place. Do not tighten the screws.
13.Align the doors so they are parallel to each other. Adjust doors to cabinet so the gasket seals but does not bind.
14.Tighten all hinge screws.
14 | WITH QUE8TIONI | OR COMMENTS |
