Roper RT18EK warranty Installing it properly, Leveling it, Model RT18DK, Model RTlSEK

Installing it properly

1.Allow I% inch (1.25 cm) air space on each side of the refrigerator for ease of installa- tion.

2.Allow 1 inch (2.5 cm) air space behind and 3 inches (7.5 cm) air space ahove the refrigerator for proper circulation.

3.If instalting the refrigerator with the hinge side against a wall, you might want to leave extra space so the door can he opened wider.

4.Make sure the fbor below the refrigerator is level and strong enough to support a fully-loaded refrigerator.

Leveling it

Model RT18DK

Your refrigerator has 2 front leveling screws - one on the right and one on the left. To adjust one or both of these, follow the directions below.

1.Open refrigerator door.

2.To raise front, turn screw clockwise.

3.To lower front, turn screw counterclock- wise.

4.Check with level.

5.Close refrigerator door.

Model RTlSEK

Your refrigerator has 2 front leveling legs - one on the right and one on the left. To adjust one or both of these, follow the directions Mow.

1.Cpen the refrigerator door.

2.Tilt refrigerator back slightly.

3.Turn leveling leg to adjust height.

4.Replace refrigerator on floor.

5.Check with level.

6.Close refrigerator door.

Right to rake;

I left to lower

Lower

N redrigenator

wer rigemtor

refrigerator	Turn leveling
	leg to adjuei

WITH QUESTIONS OR COYYENT6