OPERATION
Selecting a computer
To connect to a computer, you can select it from the UltraView Pro’s front panel, select it by keyboard commands, select it through the RS232 serial port, or you can select the computer from a computer select window as shown in Figure 10.
Selecting a computer from the front panel
Using the + and – buttons on the front panel will advance (+) or switch to the previous
Selecting a computer using keyboard commands
Press and release the left control <Ctrl> key, then enter the computer port number. Pressing and releasing the left control <Ctrl> key then the “+” or
Selecting a computer through the RS232 port
Selecting a computer can be done through the RS232 port if needed. Contact Rose Electronics Technical support for details.
Selecting a computer using the Computer select window
Press and release the left control <Ctrl> key, then press Esc. The computer select window will display. Use the up/down arrow keys and select the computer to switch to and press enter. You will be immediately connected to that computer. Use the page up/down keys if there are more than 16 computers in your system.
Computer select window
1→ Computer | 1 | |
2 | Computer | 2 |
3 | Computer | 3 |
4 | Computer | 4 |
5 | Computer | 5 |
6 | Computer | 6 |
7 | Computer | 7 |
8 | Computer | 8 |
