|
| facing front and center. | |
| 2. Unit needs to be | 2. Turn off the unit for a | |
| restarted. | minute and turn back on | |
|
| then push Start button. | |
| 3. Insufficient water | 3. Take off the bottle and | |
| pressure. | manual fill the unit with | |
|
| water. | |
| 4. Bottle has a cap or | 4. Remove cap or seal then | |
| seal. | reposition bottle back on to | |
|
| bottle supporter. Turn on | |
|
| Power and push Start | |
|
| button. | |
|
|
| |
Unit does not take in water | Water pressure is too | Reduce or increase the | |
from a water line. | high or low. | water pressure. | |
|
|
| |
| The ice maker makes the |
| |
| loud noise when it is able |
| |
| to sense water in the fill |
| |
Unit makes loud noise, | compartment but not able | Add more water to the unit | |
to draw the water into the | or adjust the water bottle. | ||
| |||
| water tank. The loud |
| |
| noise is not an indication |
| |
| of any problem of the unit. |
| |
| Due to fast freezing, ice |
| |
| cubes may appear |
| |
Unit makes cloudy ice | "cloudy". This is trapped |
| |
cubes. | air in the water and does |
| |
| not affect the taste or |
| |
| quality of the ice. |
| |
The orange light is on (ice |
| Wait about 10 – 20 minutes | |
bin full indicator) and ice | Small pieces of ice may | and the unit should resume | |
was removed from the unit | stick to the ice cube bin | the ice making process and | |
but the unit does not | sensor. | the light will turn from | |
restart . |
| orange to green. |
Technical Specifications
•Voltage: 110V
•Maximum Power: 230W
•Ice Storage: 750g
•Ice making ability: 26 Kg/24h
•Water tank capacity: 2 liter
•Iced water tank capacity: 0.8 liter
•Refrigerant Gas: R134a/80g
•Ice shape: Bullet shape
•Dimensions: 16” × 16” x 16.3” (L×W×H)
•N.W./G.W.: 53 / 57 lb
•Approvals : ETL