Rose electronic MultiStation manual Installing the Remote user module, Applying power

Installing the Remote user module

(NOTE: Power to the computer should be off)

Connect the remote keyboard, monitor, and mouse to the corresponding connectors on the remote user module. The local computer’s keyboard, monitor, mouse, and other cable connections such as a printer, scanner, or USB cables should already be connected to the corresponding ports on the computer.

Remote KVM Station

Figure 3. Remote user module

Connect the CAT5 cable from the Remote user module’s RJ45 connector to the RJ45 connector on the MultiStation PC’s PCI card.

Applying power

Turn on both the local computer’s monitor and the remote video monitor and turn on the shared computer. Windows will automatically recognize the MultiStation PC PCI card as new hardware and will prompt you to install the appropriate driver. Continue installing the drivers and after they are installed, re-start the computer when the re- start computer prompt displays. This will load the MultiStation PC’s driver.

8MULTISTATION PC INSTALLATION AND OPERATIONS MANUAL