ClearVue 6825 VCR System Owner’s Manual Page 12
Quick Reference
To power on the system:
Turn ignition switch to Run or ACC
position.
Press the release button, as shown.
The screen powers on automatically.
To watch a video tape:
1 Power on the system.
2 Point the remote at the screen and press the POWER
button to turn on the VCR.
3 Insert a video tape into the VCR. Playback begins.
To listen over the vehicle speakers:
1 Power on the system.
2 Turn on the vehicle radio and tune it to 88.7 FM.
3 Press SPEAKER ON/OFF on the remote until “FM ON”
appears on the screen.
4 If you hear no audio, try tuning the radio to 89.1 FM.
To use another video source:
(such as an optional video game or camcorder)
1 Connect the RCA audio and video outputs of the device
to the Line Inputs on the front of the VCR.
2 Press MODE on the remote until “LINE 2” appears on the
screen. The Line 2 video image appears on the screen.
To watch broadcast television:
1 Press MODE until “CH___” and the current channel number
appear on the screen (for example, “CH 2”).
2 Press the up and down arrow buttons on the remote to
change channels.
Release button
Quick Reference
Page 3 Rosen Products
Using Auxiliary Sources
The ClearVue 6825 includes auxiliary audio/video inputs that
enable you to attach an external source device such as a video
game or camcorder. You can also listen to an external audio
source such as an MP3 player, portable CD player, or MiniDiscTM.
These inputs are standard RCA connectors. One set of connectors
is on the VCR front panel and the other set is on the rear panel.
Note: Before attempting to use any auxiliary source, be sure you
have the appropriate cable to connect to the VCR system.
To connect the auxiliary device to the VCR RCA jacks:
1 Connect the right channel audio to the red jack.
2 Connect the left channel audio to the white jack.
3 Connect the video to the yellow jack.
Note: When using a non-battery operated auxiliary source (video
game, or other) in a vehicle, a 12VDC/110VAC power inverter
is required.
To play an auxiliary device:
1 Power on the device.
2 Press MODE on the remote until “LINE 2” appears on the
screen.
Using Auxiliary Sources