Advanced (Recording pictures)

[REC] mode: ñ·¿

Taking Pictures using the Built-in Flash

A Photo flash

Do not cover it with your fingers or other objects.

Switching to the appropriate flash setting

Set the flash to match the recording.

Press 1 [].

Press 3/4 to select a mode.

You can also press 1 [] to select.

For information about flash settings that can be selected, refer to “Available flash settings by Recording mode”. (P40)

Press [MENU/SET].

You can also press the shutter button halfway to finish.

The menu screen disappears after about 5 seconds. At this time, the selected item is automatically set.

Item

Description of settings

: AUTO

The flash is automatically activated when the recording conditions make it necessary.

:

The flash is automatically activated when the recording conditions make it necessary.

It is activated once before the actual recording to reduce the red-eye

AUTO/Red-eye

phenomenon (eyes of the subject appearing red in the picture) and then

reduction¢

activated again for the actual recording.

 

• Use this when you take pictures of people in low lighting conditions.

:

The flash is activated every time regardless of the recording conditions.

Forced flash ON

• Use this when your subject is back-lit or under fluorescent light.

:

• The flash setting is set to [

] only when you set [PARTY] or

Forced ON/

[CANDLE LIGHT] in Scene mode. (P46)

Red-eye

 

 

reduction¢

 

 

:If you take a picture with a dark background landscape, this feature will slow the shutter speed when the flash is activated so that the dark background landscape

Slow sync./

will become bright. Simultaneously it reduces the red-eye phenomenon.

Red-eye

• The flash setting is set to [

] only when you set

reduction¢

 

[NIGHT PORTRAIT], [PARTY], [CANDLE LIGHT] in Scene mode (P46).

Œ:

The flash is not activated in any recording conditions.

Forced flash

• Use this when you take pictures in places where the use of the flash

OFF

is not permitted.

 

¢The flash is activated twice. The subject should not move until the second flash is activated. Interval until the second flash depends on the brightness of the subject.

VQT1V73 39

Page 39
Image 39
Panasonic DMC-FS8S, DMC-FS7 Taking Pictures using the Built-in Flash, Switching to the appropriate flash setting