Panasonic DMC-FS7, DMC-FS8S Printing the Pictures, Align the marks, and insert

Connecting to other equipment

Printing the Pictures

If you connect the camera to a printer supporting PictBridge, you can select the pictures to be printed out and instruct that printing be started on the camera’s LCD monitor.

Preparations:

Turn on the camera and the printer.

Remove the card before printing the pictures in the built-in memory.

Perform the print quality and other settings at the printer before printing the pictures.

AV OUT

DIGITAL

AUSB connection cable (supplied)

• Check the directions of the connectors, and plug them straight in or unplug them straight out. (Otherwise the connectors may be bent out of shape which will cause trouble.)

BAlign the marks, and insert.

•Use a battery with a sufficient battery power or the AC adaptor (DMW-AC5PP; optional) and DC coupler (DMW-DCC4; optional). If the remaining battery power becomes low while the camera and the printer are connected, the status indicator blinks and the alarm beeps. If this happens during printing, stop printing at once. If not printing, disconnect the USB connection cable.

Connect the camera to a printer via the USB connection cable A (supplied).

•When the camera is connected to the printer, the cable disconnect prohibit icon [å] appears. Do not disconnect the USB cable while [å] is displayed.

Press 3/4 to select [PictBridge(PTP)], and then press [MENU/SET].

USB MODE
PLEASE SELECT
THE USB MODE
PictBridge(PTP)
PC
SELECT	SET

Note

•Since the camera may be scratched, it is recommended that you place it on top of a soft cloth before connecting to a printer.

•Do not use any other USB connection cables except the supplied one.

Use of cables other than the supplied USB connection cable may cause malfunction.

•Turn the camera off before connecting or disconnecting the AC adaptor (DMW-AC5PP; optional).

•Before inserting or removing a card, turn the camera off, and disconnect the USB connection cable.

•You cannot switch between the built-in memory and the card while the camera is connected to the printer. Disconnect the USB connection cable, insert (or remove) the card and then connect the USB connection cable to the printer again.

84 VQT1V73