Advanced (Recording pictures)

Under certain picture-taking conditions including the following cases, the facial recognition function may fail to work, making it impossible to detect faces. [AF MODE] is switched to [ ].

When the face is not facing the camera

When the face is at an angle

When the face is extremely bright or dark

When there is little contrast on the faces

When the facial features are hidden behind sunglasses, etc.

When the face appears small on the screen

When there is rapid movement

When the subject is other than a human being

When the camera is shaking

When digital zoom is used

˜[BURST]

For details on [REC] mode menu settings, refer to P20. Pictures are taken continuously while the shutter button is pressed. Select the ones you really like from among the pictures you have taken.

Applicable modes: ñ·¿

 

 

[OFF]

˜

ò

Burst speed (pictures/

2.3¢(DMC-FS7)

approx. 1.7 (DMC-FS7)

second)

 

3¢(DMC-FS6)

approx. 2 (DMC-FS6)

 

A

max. 3 (DMC-FS7)

 

Number of

max. 4 (DMC-FS6)

Depends on the

 

 

recordable

 

 

 

remaining capacity of the

 

 

max. 5 (DMC-FS7)

pictures

built-in memory/card.

 

max. 7 (DMC-FS6)

 

 

 

 

 

 

 

 

 

 

¢The burst speed is constant regardless of the transfer speed of the card.

The burst speed values given above apply when the shutter speed is 1/60 or faster and when the flash is not activated.

Note

When the Burst mode setting is set to Unlimited

The burst speed becomes slower halfway. The exact timing of this depends on the type of card, the picture size and the quality.

You can take pictures until the capacity of the built-in memory or the card is full.

The focus is fixed when the first picture is taken.

When the burst speed is set to [˜], the exposure and white balance are fixed at the settings used for the first picture for the subsequent pictures as well. When the burst speed is set to [ò], they are adjusted each time you take a picture.

When the self-timer is used, the number of recordable pictures in Burst mode is fixed to 3.

If you are following a moving subject while taking pictures in a place (landscape) indoors, outdoors etc. where there is a large difference between the light and shade, it may take time until the exposure is stable. If burst is used at this time, the exposure may not become optimal.

The burst speed (pictures/second) may become slower depending on the recording environment such as in dark places, if the ISO sensitivity is high etc.

Burst mode is not canceled when the camera is switched off.

If you take pictures in Burst mode with the built-in memory, it will take time to write the picture data.

[Œ] is set for the flash when burst is set.

Auto bracket is canceled when burst is set.

Burst cannot be used in [TRANSFORM], [HI-SPEED BURST], [FLASH BURST], [STARRY SKY], [FILM GRAIN] or [PHOTO FRAME] in Scene mode.

64 VQT1V73

Page 64
Image 64
Panasonic DMC-FS8S operating instructions ˜ Burst, ¢DMC-FS7, ¢DMC-FS6, Depends on, Built-in memory/card