Panasonic DMC-FS8S, DMC-FS7 operating instructions Select on Connection, PictBridgePTP, USB Mode

Preparation

x[USB MODE]

Select the USB communication system after or before connecting the camera to your PC or your printer with the USB connection cable (supplied).

y[SELECT ON CONNECTION]:

Select either [PC] or [PictBridge(PTP)] if you connected the camera to a PC or a printer supporting PictBridge.

{[PictBridge(PTP)]:

Set after or before connecting to a printer supporting PictBridge.

z[PC]:

Set after or before connecting to a PC.

•When [PC] is selected, the camera is connected via the “USB Mass Storage” communication system.

•When [PictBridge(PTP)] is selected, the camera is connected via the “PTP (Picture Transfer Protocol)” communication system.

[TV ASPECT]

Set to match the type of TV. (Playback mode only)

[W]: When connecting to a 16:9 screen TV.

[X]: When connecting to a 4:3 screen TV.

• This will work when the AV cable is connected.

[VERSION DISP.]

It is possible to check which version of firmware is on the camera.

[FORMAT]

The built-in memory or card is formatted. Formatting irretrievably deletes all the data so check the data carefully before formatting.

•Use a battery with sufficient battery power or the AC adaptor (DMW-AC5PP; optional) and DC coupler (DMW-DCC4; optional) when formatting. Do not turn the camera off during formatting.

•If a card has been inserted, only the card is formatted. To format the built-in memory, remove the card.

•If the card has been formatted on a PC or other equipment, format it on the camera again.

•It may take longer to format the built-in memory than the card.

•If the built-in memory or the card cannot be formatted, consult your nearest Service Center.

For USA and Puerto Rico assistance, please call:

1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo

For Canadian assistance, please call:

1-800-99-LUMIX (1-800-995-8649) or

send e-mail to: lumixconcierge@ca.panasonic.com

VQT1V73 25