Panasonic DMC-FS8S, DMC-FS7 Shutter speed for each flash setting, Flash setting Shutter speed Sec

Models: DMC-FS7 DMC-FS8S

1 120
Download 120 pages 12.25 Kb
Page 41
Image 41

Advanced (Recording pictures)

In [HIGH SENS.] (P51) in Scene mode, the ISO sensitivity automatically switches to between [ISO1600] and [ISO6400] and the available flash range also differs.

Wide:

Approx. 1.15 m (3.77 feet) to approx. 16.0 m (52.5 feet) Tele:

Approx. 90 cm (2.96 feet) to approx. 7.5 m (24.6 feet)

In [FLASH BURST] (P52) in Scene mode, the ISO sensitivity automatically switches to between [ISO100] and [ISO3200] and the available flash range also differs.

Wide:

Approx. 30 cm (0.99 feet) to approx. 11.3 m (37.1 feet) Tele:

Approx. 50 cm (1.64 feet) to approx. 5.3 m (17.4 feet)

Shutter speed for each flash setting

Flash setting

Shutter speed (Sec.)

1/30 to 1/2000

Flash setting

Shutter speed (Sec.)

1 or 1/8 to 1/2000¢1

1 or 1/4 to 1/2000¢2

Œ

¢1 The shutter speed changes depending on the [STABILIZER] (P65) setting.

¢2 When Intelligent ISO is set (P61)

¢1, 2: The shutter speed becomes a maximum of 1 second in the following cases.

When the Optical image stabilizer is set to [OFF].

When the camera has determined that there is little jitter when the Optical image stabilizer is set to [MODE1], [MODE2] or [AUTO].

In Intelligent auto mode, shutter speed changes depending on the identified scene.

In Scene mode, shutter speed will be different from the above table.

Note

If you bring the flash too close to an object, the object may be distorted or discolored by the heat or lighting from the flash.

When you take a picture beyond the available flash range, the exposure may not be adjusted properly and the picture may become bright or dark.

When the flash is being charged, the flash icon blinks red, and you cannot take a picture even when you press the shutter button fully. When [AUTO LCD OFF] is set, the LCD monitor turns off and the status indicator lights.

The white balance may not be properly adjusted if the flash level is insufficient for the subject.

When the shutter speed is fast, the flash effect may not be sufficient.

It may take time to charge the flash if you repeat taking a picture. Take a picture after the access indication disappears.

The red-eye reduction effect differs between people. Also, if the subject was far away from the camera or was not looking at the first flash, the effect may not be evident.

VQT1V73 41

Page 41
Image 41
Panasonic DMC-FS8S, DMC-FS7 Shutter speed for each flash setting, Flash setting Shutter speed Sec, 30 to 1/2000