4 Operating the 
Operating the In-Dash DA-7169 Color Display Monitor
To take full advantage of the
Note: The color and brightness of the LCD display screen is factory preset. To adjust picture quality, follow the instruc- tions in this guide.
Ejecting and Opening the Display Monitor
•To eject/open the display monitor, press the OPEN / CLOSE button (#6 on the Front Panel Overview on page 7) once. The display monitor will automatically eject from its DIN enclosure.
Caution: To prevent damage to the driver motor and gear train, do not obstruct the movement of the monitor tray.
•If the ejection of the display monitor is stopped halfway, press the OPEN / CLOSE button once to return the monitor to the closed position. Press OPEN / CLOSE to activate the ejection process again until the monitor is fully extended.
•The display monitor returns to the closed position when the ignition is turned OFF or when pressing the OPEN / CLOSE button when the monitor is in the open position.
Adjusting the Position of the Monitor
•Press the ANGLE + / - button (#15) to adjust the viewing angle of the monitor.
Page 11
