Operating Guide
Reset All Settings
The Reset menu option enables you to restore all settings to their original factory values.
To reset all settings:
1.Press Menu on the monitor or Monitor Menu on the remote control. The OSD menu appears.
2.Press Menu on the monitor or Monitor Menu on the remote control until the arrow points to “Reset.”
3. Press | or to return all settings to factory defaults. |
4.Press Menu on the monitor or Monitor Menu on the remote control again to exit the menu. The menu disappears after 5 seconds if no buttons are pressed.
Operating Guide
Turning On and Off the Monitor
To turn on the monitor:
•Press and release the POWER button on the monitor or the remote control.
To turn off the monitor:
•Press and hold the POWER button on the monitor or the remote control.
Changing Video Inputs
The monitor can be used with either NTSC or PAL video signals. NTSC is the North American video standard and is compatible with all Rosen video sources.
To change the active video input:
1.Press the POWER button to turn on the monitor.
2.Press MENU on the monitor or MENU on the remote control.
The following screen appears in the monitor.
AV1 : NTSC
MODE
MENU
“AV1” appears briefly when AV1 is the active input. “AV2” appears briefly when AV2 is the active input.
3. Press or to toggle between NTSC or PAL.
4.Press POWER on the monitor, or MODE on the remote control to toggle between “AV1” and “AV2.”
5.Press MENU on the monitor, or MENU on the remote control again, to exit the menu.
UN7000 7” Widescreen Universal Monitor | Page 10 | UN7000 7” Widescreen Universal Monitor | Page 7 |
