Manuals / Rosewill / Computer Equipment / Computer Drive

Rosewill R2-JBOD user manual

Models: R2-JBOD

1 12

Download 12 pages 2.28 Kb

Page 12

STEP7: When new partition is completed, the external HDD will be recognized as a “New Volume”.

External enclosure Installation [ R2-JBOD ]		User Manual

STEP7: When new partition is completed, the external HDD will be recognized as a “New Volume”.

If you divided HDD into two partitions, format two partitions separately.

After two partitions are formatted completely, you will see two healthy HDDs.

11

Image 12

Rosewill R2-JBOD user manual When new partition is completed, the external HDD will be recognized as a “New Volume”

Contents

R2-JBOD User ManualThank you for purchasing a quality Rosewill Product Hardware Installation Guide HDD Formatting GuideHardware Installation Guide External enclosure Installation R2-JBODSTEP1 Release the 4 screws then pull out the rear panel and tray User ManualNote Make sure all connectors are connected well STEP4 Screw the HDD on the tray both sides External enclosure Installation R2-JBODUser Manual HDD Formatting Guide This device can support JBOD& BIG ModeJBOD Mode STEP1 Right-click on “My Computer” icon and select the“Manage” columnSample：750GB & 250GB hard drives STEP3 Please refer to pageExternal enclosure Installation R2-JBOD BIG Mode STEP1 Right -click “My Computer” icon and select the “Manage” column STEP2 Two brand-new HDDExternal enclosure Installation R2-JBOD User ManualTwo formatted HDDs These two HDDs have to be combined into one diskSTEP3 Right-click the red-squared block and select “Initialize Disk” STEP4 Press “OK” button to initialize HDDExternal enclosure Installation R2-JBOD User ManualSTEP5 The external HDD will be showed “Online”. Right-click the “Unallocated” block and select “New Partition” STEP7 When new partition is completed, the external HDD will be recognized as a “New Volume”