Manuals / Rosewill / Computer Equipment / Computer Drive

Rosewill Screw the HDD on the tray both sides, External enclosure Installation R2-JBOD

Models: R2-JBOD

1 12

Download 12 pages 2.28 Kb

Page 4

STEP4: Screw the HDD on the tray both sides.

External enclosure Installation [ R2-JBOD ]		User Manual

STEP4: Screw the HDD on the tray both sides.

STEP5: Push the tray into the aluminum case. Screw the rear panel and enclosure together.

3

Image 4

Rosewill user manual Screw the HDD on the tray both sides, External enclosure Installation R2-JBOD, User Manual

Contents

R2-JBOD User ManualThank you for purchasing a quality Rosewill Product Hardware Installation Guide HDD Formatting GuideHardware Installation Guide External enclosure Installation R2-JBODSTEP1 Release the 4 screws then pull out the rear panel and tray User ManualNote Make sure all connectors are connected well External enclosure Installation R2-JBOD STEP4 Screw the HDD on the tray both sidesUser Manual HDD Formatting Guide This device can support JBOD& BIG ModeJBOD Mode STEP1 Right-click on “My Computer” icon and select the“Manage” columnSample：750GB & 250GB hard drives STEP3 Please refer to pageExternal enclosure Installation R2-JBOD User ManualBIG Mode STEP1 Right -click “My Computer” icon and select the “Manage” column STEP2 Two brand-new HDDExternal enclosure Installation R2-JBOD User ManualTwo formatted HDDs These two HDDs have to be combined into one diskSTEP3 Right-click the red-squared block and select “Initialize Disk” STEP4 Press “OK” button to initialize HDDExternal enclosure Installation R2-JBOD User ManualSTEP5 The external HDD will be showed “Online”. Right-click the “Unallocated” block and select “New Partition” STEP7 When new partition is completed, the external HDD will be recognized as a “New Volume”