8SETUP/MAINTENANCE

8.6Removing/Installing the Batteries

￿ WARNING

DO NOT lift batteries by the hook and loop battery strap. The hook and loop battery strap should be used to assist in removing the batteries form the wheelchair base frame.

DO NOT tip the batteries. Keep the batteries in an upright position.

If there is battery acid in the bottom of the battery tray or on the sides of the battery, apply baking soda to these areas to neutralize the battery acid. Before reinstalling the existing or new battery, clean the baking soda from the battery tray or battery being sure to avoid contact with skin and eyes. Determine source of contamination. NEVER install/reinstall a battery with a cracked or otherwise damaged case.

A battery cable secured to the top of the wheelchair base frame connects the front battery connector to the rear battery connector. It is unnecessary to remove the battery cable when removing or installing the batteries.

Have the following tools available.

TOOL

QTY

COMMENTS

7/16-INCH (6PT) BOX WRENCH

1

Not Supplied

 

 

 

DIAGONAL CUTTERS

1

Not Supplied

 

 

 

Invacare® FDX®

78

Part No 1163181

Page 78
Image 78
Invacare FDX-CG, FDX-MCG user manual Tool QTY, Removing/Installing the Batteries