5WHEELCHAIR OPERATION
5.7Running Lights
WARNING
Running lights are for increased user visibility ONLY and are NOT intended for use as automobile head/signal lights. DO NOT operate vehicle on roads, streets or highways - otherwise, serious injury or damage may occur.
For this procedure, refer to FIGURE 13.
The running lights offered on this product are an option intended to increase the visibility of the vehicle and user. Running lights are NOT intended to be used as automobile head/signal lights.
Inasmuch as this product may be equipped with running lights, this product is NOT intended for use on roads, streets or highways.
Running Lights Through MPJ+ Joystick
1.Use the mode switch to select the light mode. Refer to Mode Switch on page 51.
2.Move the joystick to turn the lights on or move and hold the joystick for 3 seconds to turn the lights on in strobe mode.
3.Move the joystick again to turn lights off.
Running Lights Through Single Function Switch
| Location of single function switch will depend on |
| wheelchair configuration. |
1. Press the single function switch to turn the lights on or hold the | |
single function switch for 3 seconds to turn the lights on in strobe | |
MPJ+ Joystick
Mode Switch
Single
Function
Switch
Single Function
Switch
Connects to
Lighting Module
mode. |
2. Press the single function switch again to turn lights off. |
Invacare® FDX® | 56 |
FIGURE 13 Preparing the Joystick for Use
Part No 1163181
