Invacare FDX-CG, FDX-MCG user manual SPJ+, SPJ+ w/PSS and SPJ+ w/ACC Joysticks

5 WHEELCHAIR OPERATION

SPJ+, SPJ+ w/PSS and SPJ+ w/ACC Joysticks

For this procedure, refer to FIGURE 10.

The Information Gauge Display located on the front of the joystick housing, it provides the state-of-battery charge, including notification of when the battery requires charging. It also provides the following information to the user on the status of the wheelchair:

A.GREEN LEDs are lit, indicating well charged batteries.

B.AMBER LEDs are lit, indicating batteries are moderately charged. Recharge batteries before taking a long trip.

C.RED LEDs are lit, indicating batteries are running out of charge. Recharge batteries as soon as possible.

MPJ+ Joystick

For this procedure, refer to FIGURE 11.

The far right side of the display screen is the Battery Gauge Display (BGD). It provides information on the remaining charge in the batteries.

At full charge, solid blocks fill in battery gauge. As the battery becomes discharged, the segments will progressively disappear starting on the right and moving towards the left a bar at a time until no segments appear. At this level the user should charge the batteries as soon as possible.

Batteries Information Gauge Display Empty

Batteries Full

Battery Charger/

Programming Port

FIGURE 10 SPJ+, SPJ+ w/PSS and SPJ+ w/ACC Joysticks

Display Screen	Battery Gage
	Display

Batteries Empty	Batteries Full
FIGURE 11 MPJ+ Joystick

Invacare® FDX® 52 Part No 1163181