9 TROUBLESHOOTING
9 Troubleshooting
9.1Driving Performance
WHEELCHAIR VEERS LEFT/RIGHT | SLUGGISH TURN/ PERFORMANCE | CASTERS FLUTTER | SQUEAKS AND RATTLES | LOOSENESS IN WHEELCHAIR | WHEELCHAIR 3 WHEELS | SOLUTIONS |
| ||||||
|
|
|
|
|
|
|
X | X | X |
|
|
| Check for loose stem nuts/bolts, bearings or signs of wear. |
|
|
|
|
|
|
|
X |
| X | X | X | X | Check for uneven tire wear, bent fork/frame or loose hardware. |
|
|
|
|
|
|
|
9.2Electrical
NOTE: For additional troubleshooting information and explanation of error codes, refer to the individual Electronics Manual supplied with each wheelchair.
SPJ™+, SPJ+ w/PSS or SPJ+ w/ACC Joysticks
The joystick information gauge and the service indicator give indications of the type of fault or error detected by the control module. When a fault is detected, the wheelchair may stop and not drive. The LEDs on the information gauge may flash in a particular pattern or the service indicator light will flash. The number or type of flashes indicates the nature of the error. If multiple errors are found, only the first error encountered by the control module will be displayed.
Part No 1163181 | 91 | Invacare® FDX® |
