Manuals / Rosewill / Computer Equipment / Computer Drive

Rosewill R2-JBOD user manual Note Make sure all connectors are connected well

Models: R2-JBOD

1 12

Download 12 pages 2.28 Kb

Page 3

Note: Make sure all connectors are connected well.

External enclosure Installation [ R2-JBOD ]		User Manual

STEP2: Place the first HDD into the tray. Push the HDD to connect the SATA connector.

STEP3: Place the second HDD into the tray. Push the HDD to connect the SATA connector.

Note: Make sure all connectors are connected well.

2

Image 3

Rosewill R2-JBOD user manual Note Make sure all connectors are connected well

Contents

Hardware Installation Guide HDD Formatting Guide R2-JBODUser Manual Thank you for purchasing a quality Rosewill ProductUser Manual Hardware Installation GuideExternal enclosure Installation R2-JBOD STEP1 Release the 4 screws then pull out the rear panel and trayNote Make sure all connectors are connected well STEP4 Screw the HDD on the tray both sides External enclosure Installation R2-JBODUser Manual STEP1 Right-click on “My Computer” icon and select the“Manage” column HDD Formatting GuideThis device can support JBOD& BIG Mode JBOD ModeUser Manual Sample：750GB & 250GB hard drivesSTEP3 Please refer to page External enclosure Installation R2-JBODBIG Mode User Manual STEP1 Right -click “My Computer” icon and select the “Manage” columnSTEP2 Two brand-new HDD External enclosure Installation R2-JBODThese two HDDs have to be combined into one disk Two formatted HDDsUser Manual STEP3 Right-click the red-squared block and select “Initialize Disk”STEP4 Press “OK” button to initialize HDD External enclosure Installation R2-JBODSTEP5 The external HDD will be showed “Online”. Right-click the “Unallocated” block and select “New Partition” STEP7 When new partition is completed, the external HDD will be recognized as a “New Volume”