Wireless Router | User’s Manual | |
|
|
|
|
|
|
3.5.1Primary AP Setup
3.5.1.1Router’s Wireless Basic Setup
First please use Cable connection connected to the Wireless Router’s LAN port. After established the connection and login into the web management page, please select “Primary AP Setup” option under “Wireless Management”. Then you should see the same as below diagram. (The default “Wireless Network Status” is “Enable”.) You can also select to start the “Secondary AP Setup” which defaults as Disable.
You will need to assign the below wireless options:
hWireless Network Status:
You can choose “enable” or “disable” to enable or disable the “Wireless Network Status”, if what you choose is “Disable”, the AP function of wireless router will be turned off.
hRadio Band:
You can select the wireless standards running on your network, if you have
hSSID:
This is the broadcasting name for your wireless connection. You can change SSID to the name you desire. Your PC/NB will need to connect to the same SSID that your Wireless Router uses. The Default SSID is “ROSEWILL”.
hSSID Broadcasting:
29