Wireless Router | User’s Manual | |
|
|
|
|
|
|
2.2 Connect test with the Router
After completing the above steps, you can use “Ping” command to test if your computer has connected with your Router.
hStart Æ Run Æ Type “cmd” Æ Click “OK”
hType “ping 192.168.1.1” and press Enter
hIf you see below message, this means the connection is set correctly. Your PC/NB is now able to link to your Router.
hIf you see below message, this means the connection is not set correctly. Please check your network connection and setup.
18