FS-8700-48 Fike Cheetah Manual

Page 34 of 36

Appendix B. Driver Error Messages

Multiple protocol drivers may exist on a FieldServer. Each driver may produce its own error messages and the FieldServer itself may produce error messages.

All messages produced by this driver begin "Cheetah:"

Error Message

Action Required

Cheetah:#1 Unknown

 

simulation function.

Report these messages to FieldServer Technologies.

Cheetah:#2 Simulation

 

function unknown.

 

Cheetah:#3 Protocol Error

 

(Start), Incoming msg

 

ignored - Waiting for next

 

msg.

 

 

Cheetah:#4 Protocol Error

Warning messages only. An incoming message was discarded

(Stop), Incoming msg

because the identifiers which mark the beginning of a message could

ignored - Waiting for next

not be found. You cannot take any action to correct this message. If it

msg.

 

occurs often check wiring, noise and installation.

Cheetah:#5 Protocol Error

 

(Chksum), Incoming msg

 

ignored - Waiting for next

 

msg.

 

 

Cheetah:#6 Protocol Error

 

(Unknown), Incoming msg

Report this error to FieldServer Technologies.

ignored - Waiting for next

 

msg.

 

 

Cheetah:#7a

Err. Zone=%d

An invalid zone has been specified. The zone causing the problem is

Max=%d

 

printed in parenthesis.4

Cheetah:#7b

MapDesc

The largest possible zone number is 255. Only Cybercat panels support

Error. Zone

value error.

this number of zones. Legacy panels support up to zone 239. Very old

(%d)

 

panels that can only send message #6 can only report information for

Cheetah:#7c FYI. Warning.

127 panels.

Zone=%d. Max zone is

If you are connected to a Cybercat panel and you get the FYI message

panel type dependent. Read

you can ignore it. If you are connected to some other panel and you get

Manual.

 

either the Err or FYI message then you will need to correct the CSV file.

Cheetah:#8 MapDesc Error.

An invalid device has been specified. The device causing the problem

Device value error. (%d)

is printed in parenthesis.4

Cheetah:#9 MapDesc Error.

An invalid loop has been specified. The loop causing the problem is

Loop value error. (%d)

printed in parenthesis.4

Cheetah:#10 MapDesc

One Map Descriptor cannot be used to store data for zones and

Error. Zone & Device

devices. Either the keyword Cheet_Zone or Cheet_Device must be set

Specified.

 

to None4.

Cheetah:#11 MapDesc

For devices only the alarm & trouble states are available. Set the

Error. With devices only

Cheet_DT values appropriately in the configuration file.4

alarm & trouble available.

 

Cheetah:#12 Message on

A port has been reserved for the Cheetah protocol and a message has

Cheetah port but no

been received on this port but there is no Map Descriptor defined for this

mapDesc found.

port.5

4Modify the CSV file, download to the FieldServer and restart the FieldServer for the changes to take effect.

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com Tel: (408) 262-2299 Fax: (408) 262-9042 Toll Free: 888-509-1970 email: support@fieldserver.com

Page 34
Image 34
Accton Technology FS-8700-48 instruction manual Appendix B. Driver Error Messages

FS-8700-48 specifications

The Accton Technology FS-8700-48 is a high-performance Ethernet switch designed to meet the demands of modern networks. This device is primarily aimed at enterprise and data center applications, providing flexibility, scalability, and enhanced performance for various networking environments.

One of the standout features of the FS-8700-48 is its 48 Gigabit Ethernet ports. These ports offer a robust foundation for high-speed connectivity, enabling efficient data transfer and communication across an organization’s network. In conjunction with these ports, the switch supports advanced Layer 2 and Layer 3 switching capabilities, allowing for effective traffic management and improved network performance.

The FS-8700-48 is equipped with a variety of technological advancements, including VLAN (Virtual Local Area Network) support. This feature enhances network efficiency by segmenting traffic into manageable parts, which can help minimize congestion and boost overall performance. With support for advanced routing protocols, businesses can optimize data flow within their network infrastructure while maintaining high levels of reliability.

Moreover, the switch features multicast support, which is critical for applications such as video conferencing and streaming media. By managing multicast traffic effectively, the FS-8700-48 ensures a high-quality experience for users, whether they are accessing media-rich applications or engaging in real-time communication.

The FS-8700-48 also comes with comprehensive security features, including port security, access control lists (ACLs), and traffic filtering options. These measures contribute to a secure networking environment, protecting sensitive data from unauthorized access and ensuring compliance with industry standards.

Power over Ethernet (PoE) capability is another hallmark of the FS-8700-48, allowing it to deliver power to connected devices, such as IP cameras and wireless access points. This eliminates the need for separate power sources, simplifying installation and reducing overall infrastructure costs.

In addition, the FS-8700-48 is designed for easy management and monitoring. It supports various network management protocols, including SNMP (Simple Network Management Protocol), making it simpler for IT administrators to oversee traffic patterns, troubleshoot issues, and ensure optimal performance.

To sum up, the Accton Technology FS-8700-48 Ethernet switch is an ideal solution for organizations looking to build a scalable and high-performing network. With its extensive features, advanced technologies, and robust security measures, the FS-8700-48 is well-equipped to support the dynamic networking needs of modern enterprises.