FS-8700-48 Fike Cheetah Manual Page 5 of 36
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserv er.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll Free: 888-509-1970 email: support@fieldser ver.com
3. Hardware Connections
1
The FieldServer is connected to the Cheetah panel's Peripheral Port (see below).
This port is either a serial port (identified as jack 4) or RS-485 port (use the terminals adjacent
to jack 4).
Configure the Cheetah Panel according to manufacturer’s instructions
3.1. RS-232 Connection to Fike Cheetah Panel
1
T
he connection diagram s are for Non Cybercat Panels. Connection info was not avai lable at the time
this document was last updated.