Rosewill RSL-113 user manual Replace the parts, Problem Solving, Safety Guide, Technical Data

PIR Solar Spotlight/PIR Solaire Lumière RSL-113

7 Replace the parts

1.LED can’t be replaced

2.Battery replacement

*Turn the switch “off”

*See 3. PIR Solar Spotlight body installation

*Replace the batteries with 3pcs 1.2V AA 1300mAh Ni-MH rechargeable batteries

8 Problem Solving

*Make sure the switch is “on”. *Make sure the panel is not broken.

*Make sure the panel is installed in places free from shadow

*Make sure the panel is not polluted by dirt. If have, please clean it with water by soft cloth. Do not use solvents. Take extreme care not to scratch the clear cover.

9 Safety Guide

*The PIR Solar Spotlight is waterproof on normal conditions, but please make sure it is not always exposed to a lot of water, or installed in some moist places, like bathroom. *Make sure hands are not wet when replacing the batteries.

*Make sure not to reconstruct the PIR Solar Spotlight by yourself, to avoid any possible malfunction, fire or electronic shock.

*Make sure the PIR Solar Spotlight is not installed where the temperature is too high. *Please notice that the Ni-MH batteries recharging capacity might decline under extreme low temperature.

*The LED inside can not be replaced.

10 Technical Data

LED

Battery

Sensor

Sense

Light duration per sense

Material

Wire length

2pc 1watt power LED (2 heads) 3pcs 1300mAh Ni-MH batteries PIR sensor

About 6m*90° 25~35 seconds Plastic About 5m

6