Rotel RLC-1080 Model Number Serial Number Screen, Internet Address Screen, Audible Alarm Setting

RLC-1080Power Conditioner

Model Number and

Serial Number Screen

This screen displays the model number and serial number of your unit. Please have this information available any time you need to talk with Rotel Technical Support, as well.

����������������

����������������

Internet Address Screen

This screen provides the world-wide Internet Web address for Rotel.

����������������

INPUT FREQUENCY; OUTPUT FREQUENCY Screen

This screen shows the AC line frequency of the power coming from the wall power outlet and the AC line frequency of the power being sup- plied to the connected devices.

10

Connecting the Components

WARNING: Do not make telephone, cable, Ethernet, antenna, electrical, or ground system connections during a lightning storm. Failure to comply may result in personal injury or death.

The RLC-1080 has four groups of power outlets. Each group has specialized filtering and surge protection that are specifically designed for certain type of components. It is recommended that you connect your A/V components to the power outlets that are designed for that type of unit. For more information see the AC Power Outlets section of this manual.

Connect the ground connector of each component in the system to the SYSTEM GROUND terminal on the RLC-1080. This will eliminate “ground loops” thus prevent the audible hum that they might otherwise produce.

Setting Up the RLC-1080

Using the front panel SETUP and Arrow Up/ Down buttons, you can configure or turn on/off, various functions of the RLC-1080. Pressing the SETUP push button will display these functions in the following order:

1.Audible Alarm

2.Sensitivity, Display Dimmer

3.LED Dimmer

4.Go To Battery If <XX Volts, Go To Battery if >XX Volts

5.Outlet Delay1

6.Outlet Delay2

7.Low Battery Warning

8.Battery Replacement Date

9.Do Quick Selftest

10.Do Runtime Calculation

11.Display Beep Test

12.Screen Saver On/Off, or Reset to Default

AUDIBLE ALARM Setting

When set to ON this provides an audible tone whenever the unit detects a problem with itself, or with an externally connected battery pack. In the OFF setting, the audible tone is silenced.

����������������

����������������

At times, the frequency values on this screen may not match. This is due to the fact that separate circuits are used to make frequency measure- ments, and there is a time delay between the two circuits for updating this status screen. This condition is normal.

Note: The display will revert to the default SOURCE; EST RUNTIME screen after about 30 seconds of inactivity. The default screen can be changed. See the “Setting the Default Screen” section of this manual.

����������������

������������������

SENSITIVITY Setting

Press the SETUP button to advance to the Sensi- tivity function. This feature adjusts how the RLC- 1080 reacts to abnormal power input voltage or momentary power fluctuations. It allows you to adjust the sensitivity to LOW, MEDIUM or HIGH using the SETUP and Up/Down Ar- row buttons. The Sensitivity adjustments have the following values: