Rover 108, 109 owner manual Rover Mowers LimitedRide-on Mower Grass Catcher

Rover Mowers LimitedRide-on Mower Grass Catcher

The Rover Ride-on Mower Grass Catcher has been designed to be fitted to and used with the Rover Rancher, Raider and Lawn King, fitted with either the 30" or the 38" pressed steel cutterheads.

The correct model grass catcher to suit the Rover Rancher, Raider and Lawn King models and cutterhead combination can be selected from the "Grass Catcher Selection Chart" (See Section 1. 1 below).

Some Rover Ride-on Mowers will need to have a towbar fitted and/or the use of a different mount support bracket before the Rover Grass Catcher can be correctly mounted. These mowers are identified in the chart below by an asterisk *

1.SETTING UP

1.1Grass Catcher Selection

		Cutterhead	Catcher	Towbar	Mount support
Rover Ride-on Mower	Model No.	Model No.	Model No.	Model 110	Bracket
				Required	A12 942
Rancher Selector Drive	17166	180	108		*
		198	109
Rancher Selector Drive	27166	180	108	*
		198	109	*
Rancher Selector Drive	17188	180	108		*
		198	109
Rancher Selector Drive	27189	180	1'08	*
		198	109	*
Rancher Auto-Drive	18166	180	108		*
		198	109
Rancher Auto-Drive	28166	180	108	*
		198	109	*
Rancher Auto-Drive	18188	180	108		*
		198	109
Rancher Auto-Drive	28189	180	108	*
		198	109	*
Rancher H dro	28266	180	108	*
Raider	4078	180	108
Lawn King Hydro	2950	180	108
		198	109

WARNING

The Rover Grass Catcher Models 108 and 109 are designed for front engine ride-on mowers ONLY!

DO NOT FIT lO8/l09 Grass Catchers to rear engine mowers.

Before proceeding with the assembly of the grass catcher, remove the loose parts kit from the carton.

1.2 Loose parts kit – Model 108 (30” Cutterhead)

Item	No. Su lied
Transfer tube	1
Chute assembly	1
Rod-outlet chute	1
Fan disks assembly	1
Grass catcher assembly	1
Support bracket	1
Owner's manual	1
Side frame	2
Spreader	1
Bolt - 3/8 x 1" unc.	2
Nycloc nut - 3/8" unc.	3
Nyloc nut – ¼" unc.	4
Screw - 3/16' x 1" unc. RH.	4
Nyloc nut - 3/16' unc.	4
Washer - 3/8" flat	2

1.3 loose parts kit – Model 109 (38” Cutterhead)

Item	No. Su lied
Transfer tube	1
Chute assembly	1
Rod-outlet chute	1
Grass catcher assembly	1
Support bracket	1
Owner's manual	1
Side frame	2
Spreader	1
Bolt - 3/8 x 1" unc.	2
Nyloc nut - 3/8" unc.	3
Nyloc nut – 1/4" unc.	4
Screw - 3/16' x 1" unc. RH.	4
Nyloc nut - 3/16' unc.	4
Skirt	1
Bolt- 5/16' x ¾" cuphead	2
Washer - 5/16' flat	2
Nyloc nut - s/16" unc.	2
Washer - 3/8" flat	4