MAINTENANCE
HOW TO REPLACE
THE MOTION DRIVE BELT
REMOVAL
1.Remove the mower housing. See the instructions on How To Remove The Mower Housing.
2.Completely push the pedal forward and engage the parking brake.
3.Remove the idler pulley (Figure 27).
Drive Pulley
Motion
Drive Belt
Idler Pulley
Loosen The
Belt Guides
Figure 27
4.To access the belt guides, remove the battery and battery tray. See How To Remove The Battery.
5.Loosen the belt guides at the drive pulley (Figure 28).
Seat Spring
Belt Guides | Figure 28 |
6.Remove the motion drive belt from the drive pulley (Figure 27).
7.Remove the adjuster nut from the shifter bracket (Figure 29). Pull the motion drive belt over the shifter bracket.
Shift |
|
Link | Adjuster Nut |
| |
| Shifter |
| Bracket |
| Hair |
| Pin |
Motion Drive Belt |
|
| Figure 29 |
8.To remove the motion drive belt from the stack pulley, pull the front end of the belt under the stack pulley and then back between the stack pulley and the steering plate (Figure 30).
FRONT
Stack Pulley | Steering |
| |
| Plate |
Motion | Belt Guides |
| |
Drive |
|
Belt | Figure 30 |
9.Remove the access panel (Figure 31).
10.Remove the two screws that attach the steering shaft assembly (Figure 31). Raise the steering wheel and steering shaft assembly. Pull the motion drive belt under the steering shaft assembly.
Screw |
|
|
Steering Shaft |
|
|
Assembly |
|
|
Motion Drive |
|
|
Belt | Access Panel | Figure 31 |
|
11.Remove the motion drive belt. A correct replacement part or assistance is available from an Authorized Service Center in your area.
F 050758L | 29 |
