Furuno 1724C, 1734C Restarting navigation, Example of when to restart navigation, Log display

3. PLOTTER OPERATION

Restarting navigation

When you steer to avoid an obstacle or the vessel drifts, you may go off your intended course, as in Line 1 in the figure below. Also, if you don’t need to return to the original course, you can go directly to the next waypoint, as in Line 2 in the figure below. In these cases, use the restart navigation function to restart navigation.

Obstacle

Original course

Line 2

Line 1

Example of when to restart navigation

1.Press the MENU key to open the menu.

2.Press the WAYPOINTS/ROUTES soft key.

3.Press the LOG soft key.

Destination waypoint (Waypoint name in reverse video)

Passed waypoint (gray characters)

Estimated Time of Arrival at destination

▲

Replaces triangle when selecting a

route leg.

ETA 23:59 11.FEB

0134°44.111'N 001WPT 135°21.134'W

0234°43.432'N 003WPT 135°41.456'W

0334°14.124'N 002WPT 135°21.567'W

0434°44.569'N 005WPT 135°21.152'W

0534°54.124'N 008WPT 135°21.888'W

LEG

29.9°

12.0nm

159.9°

6.00nm

50.5°

29.8nm

359.9°

3.0nm

LOG

RE-

START

STOP

RVRSE

SPEED

COORD

TYPE

Replaced by

"FOLLOW LEG" when selecting a route leg.

Log display

4.Use the Cursor pad to select a waypoint or a route leg. When a route leg is selected the single arrow cursor is replaced by double arrows.

5.Press the RESTART soft key or FOLLOW LEG soft key in case of route leg. RESTART: Line2 in the figure above

FOLLOW LEG: Line 1 in the figure above

6.Press the MENU key to close the menu.

3-46