Furuno 1734C, 1724C manual Plotter Displays, Full-screen plotter display, Nav data window

Presentation mode (North-up)

Trip distance

3. PLOTTER OPERATION

3.1Plotter Displays

You may show the plotter display over the entire screen, in the overlay screen with the radar display, or in a combination screen.

3.1.1Full-screen plotter display

Nav data window

(Data changes with NAV soft key setting and cursor

status. For details see next page.)

34° 22.	3456'N	359.9° M	TRIP NU
080° 22.	3456'E	19.9 kt	99.9 nm

Scale		16.0nm		MARK
			S I M	ENTRY
				MODE
Icon (from left)				NTH UP
North Marker				NAV
Chart				POS
Alarm
Track Hold
Chart Offset		002WP	FISH	D. BOX
Save				ON/ OFF
L/L Offset				BRIDGE
Battery
Simulation
(See icon
table on
appendix				Own ship
for details.)
	Waypoint name			marker
			Course bar

Functions for soft keys

Waypoint marker	Own ship
	track

Full-screen plotter display

Note: When GPS signal error is found, the following occurs depending on the device feeding position data:

FURUNO BB GPS Receiver: Alarm icon () appears and the aural alarm sounds. Own ship marker blinks faster.

Other navigator: The message “NO GPS FIX” appears and is accompanied by the aural alarm and alarm icon. If the GPS signal is missing for more than 90 seconds, the message “NO POSITION DATA” appears.

Nav data window

The data shown in the nav data window depends on the status of the NAV soft key and the cursor.

3-1