Furuno 1724C, 1734C manual Nav Data Display Setup, Nav data setup screen, Nav data setup window

7. CUSTOMIZING YOUR UNIT

7.8Nav Data Display Setup

The nav data display shows various navigation data, fed from a navigator, network equipment, etc. You may select the data to display and where to display it as follows:

1.Press the MENU key to open the main menu.

2.Press the SYSTEM CONFIGURATION, SYSTEM SETUP, HOT PAGE & NAV DISP SETUP and NAV DATA DISPLAY SETUP soft keys.

Positions for full screen

Positions for half screen

1

POSITION

2	3
WPT POS	SOG
4	5
STW	COG
6	7
BEARING	RANGE
8	9
DEPTH	TEMP
10	11
LOG TRIP	TTG

12

ETA

1314

DATE TIME

NAV

DATA

EDIT

RETURN

Nav data setup screen

3.Use the Cursor pad to select a location.

4.Press the EDIT soft key. The following display appears.

§DISPLAY DATA

POSITION

WPT POSITION

SOG

STW

COG

BEARING

RANGE

DEPTH

TEMPERATURE

TRIP LOG

TIME TO GO

ETA

DATE

TIME

°WIND

Nav data setup window

5.Select the data to display, then press the ENTER soft key or ENTER knob to register your selection.

6.Press the RETURN soft key followed by the MENU key to close the menu.

7-32