Furuno manual NavNet system Model 1724C/1734C

SYSTEM CONFIGURATIONS

All NavNet products incorporate a “network circuit board” to integrate each NavNet product on board through an optional LAN cable (Ethernet 10BASE-T). Each NavNet product is assigned an IP address to enable transfer of images between other NavNet products. For example, video plotter pictures can be transferred to a radar and vice versa. Pictures received via the NavNet may be adjusted at the receiving end.

The number of display units which may be installed depends on the number of network sounder connected. For a system incorporating three or more products, a “hub” is required to process data.

For one network sounder: one radar and three plotters, or four plotters

For two network sounder: one radar and two plotters, or four plotters

NavNet system (Model 1724C/1734C)

Antenna Unit	GPS Receiver
	GP-320B/330B or Weather
(ex. MODEL 1724C)	Station WS-200

				Echo sounder
					Navigator
			Display Unit
			RDP-148	External buzzer
	AIS Interface
AIS transponder					PC
	IF-1500AIS*
				Echo sounder
	* Not required
	for AIS Transponder				Heading
	FA-150.
					sensor
	Remote
	Controller				FA-30
	RMC-100			HUB
					AIS RECEIVER
	Network sounder				Rectifier
					PR-62
Other NavNet unit		ETR-6/10N
		ETR-30N
(GD-1720C, etc.)			12-24 VDC
				100/110/115/220/230 VAC
				1φ, 50/60 Hz

NavNet system (Model 1724C/1734C)

ix