Furuno 1724C, 1734C manual 25.7 ARP, TTM target data, ARP target data

2. RADAR OPERATION

2.25.7 ARP, TTM target data

You can show motion trends (range, bearing, course, speed, CPA and TCPA) for ARP or TTM targets.

1.Place the cursor on the target whose data you want to see.

2.If not already displayed, press the HIDE/SHOW key to show the radar soft keys.

3.Press the TARGET and TARGET INFO soft keys. The data of the selected target appears at the bottom left-hand corner of the display. (If an EBL/VRM data box is displayed the ARP (TTM) data box will be under it.)

4.Press the RETURN soft key to finish.

To erase ARP/TTM target data, select the corresponding target with the cursor, then press the CLEAR key.

	.250/	.125nm		319.9	° T	TARGET
	SP
	H-UP			+
						TRAIL
Cursor						TLL
						OUTPUT
ARP						ACQ
		01
Target
						TARGET
						INFO
						RETURN
	No.01 VECTOR TRUE 15min					359.9° R
	CSE 359.9°T SPD 12.5kt
						+0.240nm
	CPA 2nm		TCPA 12.35

CPA and TCPA

Course and Speed

Target No., Vector Reference (True), Vector Time

ARP target data

2-34