Furuno 1724C, 1734C Saving data to a memory card, Memory card messages, Message Reason Remedy

6. DATA TRANSFER

Note: If the memory card was not inserted correctly, the message “FAILED TO FORMAT MEMORY CARD.” appears.

6.1.2Saving data to a memory card

1.Insert a formatted memory card into the slot.

2.Press the MENU key followed by the SYSTEM CONFIGURATION, DATA TRANSFER, UPLOAD/DOWNLOAD DATA and SAVE DATA TO MEMORY CARD soft keys to show the SAVE DATA menu.

3.Use the Cursor pad to select item to save.

4.Press the EDIT soft key.

5.Use the Cursor pad to select ON.

6.Press the ENTER soft key.

7.Repeat steps 3 to 6 to choose other data to save if desired.

8.Press the SAVE soft key, then press the ENTER knob. The message “NOW SAVING DATA TO MEMORY CARD. DO NOT TURN OFF DISPLAY UNIT UNTIL COMPLETED.” appears.

When saving is completed, “COMPLETED SAVING DATA. PUSH ENTER KNOB TO CONTINUE.” appears. Push the ENTER knob to continue.

Memory card messages

Various memory card messages appear to alert you to memory card-related error. These are tabulated below.

Memory card messages

Message	Reason	Remedy
Memory card is not	Memory card not	Push the ENTER knob to return to the
inserted. Please insert	inserted.	SAVE DATA display and then insert card.
memory card. Push
ENTER knob to continue.
Overwrite data?	Data type to be	Push the ENTER knob to overwrite same
(Track)	recorded exists on	data type on the card, or press the CLEAR
(Mark)	memory card. (Two or	key to escape.
(WPT)	more of same type of
(Config)	data cannot be
	recorded.)
Failed to save data. Push	Could not save data.	Push the ENTER knob to continue.
ENTER knob to continue.

6-2