Furuno 1734C, 1724C manual Plotter Function

4.6	Output Data
	Alarm signal	12 VDC, 100 mA or less
	NMEA 0183 Ver1.5	GGA, GLL, RMA, RMC, GTD, VTG, ZDA (GPS data required)
		RMB, WPL, BWC or BWR, APB, AAM, BOD, XTE, VHW, MTW,
		DPT or DBT, HDT, HDG, MWV, ZTG
		TLL (L/L, Heading data required), TTM (ARPA required)
5	PLOTTER FUNCTION
5.1	Projection	Mercator
5.2	Usable Area	85 latitude or below
5.3	Effective Area	133.4 x 97.3 mm
5.4	Display pixels	480 x 640 dots
5.5	Position Indication	Latitude/longitude, Loran C LOP, DECCA LOP or MGRS

5.6Effective Projection Area 0.125 nm to 2,048 nm (at equatorial area)

5.7	Track Display	Plot interval: by time (1 sec. to 99 min. 99 sec.) or
		by distance (0 to 99.99 nm)
5.8	Track Colors	Red, yellow, green purple, light-blue, blue, white
5.9	Memory Capacity	Track/mark: 8000 points, Waypoint: 999 points
5.10	Storage Capacity	Simple route: 200 routes with 35 waypoints each
5.11	MOB	1 point
5.12	Quick Routes	1 course with 35 waypoints max.
5.13	Electronic Chart	SD Card: NAVIONICS Gold Chart card, or
		C-MAP NT MAX chart card
5.14	Alarms	Arrival and Anchor watch, Cross track error and proximity
		alarms, Ship’s speed in and out alarms, Water temperature,
		Trip alarm, Fish alarm, Bottom alarm (ETR required), Grounding
		alarm (C-MAP only)

6 POWER SUPPLY

6.1Rated Voltage/Current

M1724C	12-24 VDC: 5.9-2.8 A
M1734C	12-24 VDC: 5.6-2.7 A
6.2 Rectifier (option)	PR-62: 100/110/115/220/230 VAC, 1 phase, 50/60 Hz

SP - 3