Furuno 1734C, 1724C manual Plotter function key menu, Function Default Function Function Key Label

		7. CUSTOMIZING YOUR UNIT
			(Con’t from previous page)
Popup Info	You may show the information for objects as below.		ALL ON, POINTS ON,
(C-Map only)	OFF: No information appears.		OFF
	ALL ON: When the cursor is placed on anywhere
	on chart, the information for that location appears.
	POINTS ON: When the cursor is placed on an
	object symbol, the information for it appears.
QPT/MARK	Chooses the function of the uppermost soft key on		QUICK POINT, MARK
Soft Key	the plotter display between QUICK POINT and		ENTRY
	MARK ENTRY.
	QUICK POINT: Enters the quick point at the cursor
	or own ship position.
	MARK ENTRY: Enters the mark at the cursor or
	own ship position.
SHIP SHAPE	Chooses configuration for own ship marker.		BOAT(L), BOAT(S),
			CIRCLE, CROSS
D. BOX	Sets up data boxes. See paragraph 7.5.
(soft key)

7.3.2Function key setup

The function keys provide one-touch execution of a desired function. The default plotter function key settings are as shown in the table below.

Function	Default Function	Function Key Label
Key
1	Start/stop recording/plotting own ship’s track.	TRK
2	Edit mark/line.	EML
3	Ruler (measure range and bearing between two points).	RUL
4	Add new waypoint.	ADD
5	Alphanumeric waypoint list.	ALP

If the above settings are not to your liking you may change them as follows:

1.Press the MENU key.

2.Press the FUNCTION KEY SETUP soft key.

		FUNC
Function key	XSOFT KEY 1	KEY
setting	TRK: TRACK ON/OFF	EDIT
Function		T
	SOFT KEY 2	R
key label		K
	EML: EDIT MK/LINE
		E
	SOFT KEY 3	M
		L
	RUL: RULER	R
		U
	SOFT KEY 4	L
	ADD: ADD NEW WPT
		A
	SOFT KEY 5	D
		D
	ALP: ALPHA LIST	RETURN
		A
		L
		P

Plotter function key menu

7-11