Furuno 1734C, 1724C manual Playing back data from a memory card, Load data menu

6. DATA TRANSFER

6.1.3Playing back data from a memory card

Data (track, marks, lines, waypoints, routes and setting data) can be loaded from a memory card and displayed on the screen. This feature is useful for observing past data and setting up the equipment for a specific purpose with “setting data.”

1.Press the MENU key followed by the SYSTEM CONFIGURATION and DATA TRANSFER soft keys.

2.Press the UPLOAD/DOWNLOAD DATA soft key.

3.Press the LOAD DATA FROM MEMORY CARD soft key to show the LOAD DATA menu.

▲

TRACKS OFF

MARKS & LINES OFF

WAYPOINTS & ROUTES OFF

SETTING DATA* OFF

WALLPAPER OFF

LOAD DATA

EDIT

LOAD

RETURN

* = Plotter data only

Load data menu

4.Use the cursor pad to select item to load.

5.Press the EDIT soft key. (The EDIT soft key is inoperative when no memory card is inserted or there is no data in the memory card.)

6.Use the cursor pad to select ON. (Select OFF not to load selected data.) Press the ENTER soft key. If the memory card does not contain the item selected, the unit beeps and ON cannot be selected.

7.After selecting all items desired, press the LOAD soft key, then press the ENTER knob. The message “NOW LOADING FROM MEMORY CARD.” appears.

8.After loading is completed, the message “COMPLETED LOADING DATA. PUSH ENTER KNOB TO CONTINUE.” appears. Push the ENTER knob to continue.

Notes on loading data

Tracks: Since loaded track data is added to internal track, oldest track will be erased when the track memory capacity is exceeded.

Waypoints & routes: The loaded data replaces like stored data.

Marks & lines: The loaded data is added to internal data. When the mark/line memory becomes full no marks may be entered.

Setting data: The loaded data replaces current configuration settings. If the memory card contents could not be loaded, push the ENTER knob to restart with default settings. Note that track memory capacity is not saved or loaded. To use loaded setting data, turn the power off and on again.

Wallpaper: Load desired wallpaper.

6-3