2. RADAR OPERATION

2.25.6 Displaying past position (ARP)

This ARP can display time-spaced dots (maximum ten dots) marking the past positions of any targets being tracked. You can evaluate a target’s actions by the spacing between dots. Below are examples of dot spacing and target movement.

(a) Ship turning

(b) Ship running

(c) Ship reduced

(d) Ship increased

 

straight

speed

speed

Past position displays

To turn the past position display on or off:

1.Press the MENU key followed by the ARP SETUP soft key.

2.Operate the Cursor pad to select HISTORY INTERVAL.

3.Press the EDIT soft key to show the history interval window.

HISTORY INTERVAL

°

§OFF

30 seconds

1 minute

3 minutes

6 minutes

History interval window

4.Operate the Cursor pad to select history interval among 30 sec, 1 min, 3 min and 6 min, or select OFF to turn off the past position display.

5.Press the ENTER soft key.

6.Press the MENU key to close the menu.

2-33

Page 64
Image 64
Furuno 1734C, 1724C manual Displaying past position ARP, Past position displays, History interval window