Furuno 1724C, 1734C manual Proximity Alarm, CPA window, Tcpa window

5. AIS OPERATION

CPA

▲

~OFF { 0.5nm { 1nm { 2nm { 3nm { 5nm { 6nm

▼

CPA window

6.Select a CPA limit desired from 0.5 nm, 1 nm, 2 nm, 3 nm, 5 nm and 6 nm with the Trackball.

7.Press the ENTER soft key.

8.Choose TCPA.

9.Press the EDIT soft key to show the TCPA window.

TCPA

▲

~30 seconds { 1 minute { 2 minutes { 3 minutes { 4 minutes { 5 minutes { 6 minutes { 12 minutes

▼

TCPA window

10.Select a TCPA limit from 30 sec, 1 min, 2 min, 3 min, 4 min, 5 min, 6 min and 12 min.

11.Press the ENTER soft key.

12.Press the MENU key to close the menu.

5.8Proximity Alarm

The proximity alarm alerts when there are AIS targets within the range you set. When an AIS target comes within the proximity alarm range, the message AIS TARGET COMES CLOSE appears.

1.Press the MENU key.

2.Press the SYSTEM CONFIGURATION soft key.

3.Press the GENERAL SETUP soft key.

4.Press the AIS OPTION soft key to show the AIS OPTION menu.

5.Choose PROXIMITY ALARM and push the ENTER knob.

6.Enter proximity alarm range (0.01-24 nm) and press the ENTER soft key.

7.Press the MENU key to close the menu.

5-6