Furuno 1734C Selecting image source, Select source menu, Radar source and sounder source windows

1. OPERATIONAL OVERVIEW

1.5.4Selecting image source

When more than one network radar or network sounder is connected to the equipment, you may select an image source for each as shown below. This is not necessary when only one network radar or network sounder is connected.

1.Press the DISP key.

2.Press any soft key to show the following display.

▲RADAR SOURCE

1 (HOST NAME: NAVNET1)

SOUNDER SOURCE* SOUNDER _

IP ADDRESS 172.031.003.003

DEVICE NUMBER

2 (HOST NAME: NAVNET2)

SELECT SOURCE

EDIT

IF THERE IS MORE THAN ONE NETWORK RADAR OR ECHO SOUNDER, YOU MAY SELECT THE IMAGE SOURCES FOR DISPLAY.

RETURN

*: Do not change this setting.

Select source menu

3.Use the Cursor pad to select RADAR SOURCE, SOUNDER SOURCE or AUX SOURCE as appropriate, then press the EDIT key.

RADAR SOURCE

▲§

1 (NAVNET1)

2 (NAVNET2)

°3 (NAVNET3)

4 (NAVNET4)

▼

Radar source

SOUNDER SOURCE

▲§

￿ETR0 (SOUNDER) ETR1 (SOUNDER1) ETR2 (SOUNDER2) ETR3 (SOUNDER3) ETR4 (SOUNDER4) ETR5 (SOUNDER5) ETR6 (SOUNDER6) ETR7 (SOUNDER7)

°ETR8 (SOUNDER8)

ETR9 (SOUNDER9)

▼

Sounder source

Radar source and sounder source windows

4.Use the Cursor pad to choose source.

5.Push the ENTER knob to set.

6.Press the DISP key to finish.

7.Turn the power off and on again.

1-11